
|
HP 10GBASE-T Dual NIC
Module Z6/8 G4 (1QL49AA)
Introduction The HP Z Dual-Port 10GbE
Network Module is a 10GBASE-T adapter utilizing the Intel® X722 MAC and
X557-AT2 PHY pairing to deliver full line-rate
performance, utilizing CAT 6A UTP cabling (or better) with distances up to
100 meters. Providing high performance Ethernet
connectivity, it is ideal for use in workstation, virtual workstation and
cloud computing environments. It supports enterprise class features
(VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding),
Receive Side Scaling (RSS), jumbo
frames, PXE boot) and virtualization features (VMware® NetQueue and Microsoft
VMQ). Experience increased performance with offload
protocols and Intel’s iWARP
RDMA protocol. The module was developed to be a low-cost option without the need of a PCIe slot,
which can help with network transitions to 10G. Performance and Features • Industry-leading throughput and
latency performance • Operates at 1Gbps/10Gbps,
auto-negotiation, on both ports • 10GBASE-T connectivity
supporting up to 100 meters with CAT 6A cabling (or better) • Up to a theoretical 20Gb/s
bi-directional near line rate throughput per port (combined dual port
throughput limited) • Remote Direct Memory Access
(RDMA) using internet Wide Area RDMA Protocol (iWARP) • SR-IOV capable in hardware
(requires server FW, SW and OS support; 128 per device) • 1,536 Transmit and Receive
Queues per port • Jumbo Frames, Checksum & Segmentation
Offload, IPv6 and RSS • Field replaceable and
upgradeable • Support for Preboot eXecution
Environment (PXE) • IEEE 1588 / IEEE 802.1as (Time
Synchronization) • Energy Efficient Ethernet (EEE)
for low power consumption during periods of low data activity Network Management I/O Virtualization support
for VMware® NetQueue and Microsoft VMQ help meet the performance demands of
consolidated virtual workloads. Compliant with Single-Root
I/O Virtualization (SR-IOV), accommodating up to 256 Virtual Machines (VMs)
to share single PCIe resources.
Network virtualization can be taken a step further with support of Network
Service Headers (NSH), Geneve, VXLAN, and NVGRE. The HP Z
Dual-Port 10GbE Network Module HP Z 10GbE Dual Port Module is SR-IOV ready,
requiring firmware, software and OS support. RDMA with iWARP With the Intel® C620 series
chipset, the HP Z Dual-Port 10GbE Network Module HP Z 10GbE Dual Port Module natively
supports a form of Remote Direct
Memory Access (RDMA) using Internet Wide Area RDMA Protocol (iWARP). The
Intel® iWARP support enables three performance-enhancing
features: Kernel Bypass – which
allows software applications to bypass the OS and directly access the Ethernet adapter
resources, Direct Data Placement – which allows data to be written directly into user space,
bypassing buffers, and Transport
Acceleration – where the TCP/IP and
iWARP protocols are accelerated in silicon relative to host software stacks. All of these
features equate to reducing latency, freeing up processor cycles, and
increasing memory bandwidth. RDMA support may be limited
depending on OS support. Dual-port 10 Gigabit
Ethernet Throughput The HP Z Dual-Port 10GbE
Network Module HP Z 10GbE Dual Port Module delivers 20 Gbps full duplex
Ethernet transfer rate per individual port,
providing the network performance needed to improve response times and
alleviate bottlenecks that impact performance of next
generation data centers. 10Gb Ethernet bandwidth is ideal for high
performance workstation computing, virtual
workstations, database access, and more. On the HP Z8 Gen 4 and Z6
Gen 4 Workstations, the HP Z Dual-Port 10GbE Network Module HP Z 10GbE Dual
Port Module will operate with a combined
theoretical throughput of 32 Gbps full duplex when both ports are actively
transferring at maximum capacity. Service and Support The HP Limited Warranty terms
and conditions for HP-branded options and accessories (collectively referred
to in this HP Limited Warranty collectively as
"HP Option") are as set forth in the HP Limited Warranty applicable
to the HP Option and included with the HP Hardware Product. If
your HP Option is installed in an HP Hardware Product, HP will provide
warranty service for either the period specified in the
warranty documents (HP Option Limited Warranty Period) that shipped with the
HP Option or for the remaining warranty period
of the HP Hardware Product in which the HP Option is installed, whichever
period is longer, but not to exceed three (3) years from
the date you purchased the HP Option. The HP Option Limited Warranty Period
starts from the date of purchase from HP or an HP
authorized reseller. Your dated sales or delivery receipt, showing the date
of purchase of the HP option, is your warranty
start date. See your HP Option Limited Warranty for details. To the extent permitted
by local law, non-HP options are provided
"AS IS." However, non-HP manufacturers and suppliers may provide
warranties directly to you. Technical Specifications
| ||||||||||||||||||||||||
|
|
- 상품 택(tag)제거 또는 개봉으로 상품 가치 훼손 시에는 상품수령후 7일 이내라도 교환 및 반품이 불가능합니다.
- 상품은 고객 변심에 의한 교환, 반품은 고객께서 왕복배송비를 부담하셔야 합니다(제품의 하자,배송오류는 제외)
- 일부 상품은 신모델 출시, 부품가격 변동 등 제조사 사정으로 가격이 변동될 수 있습니다.
- HP 제품의 경우, 제품 및 본 상품의 박스 훼손, 분실 등으로 인한 상품 가치 훼손 시 교환 및 반품이 불가능 하오니, 양해 바랍니다.
- 일부 특가 상품의 경우, 인수 후에는 제품 하자나 오배송의 경우를 제외한 고객님의 단순변심에 의한 교환, 반품이 불가능할 수 있사오니, 각 상품의 상품상세정보를 꼭 참조하십시오.
- 소비자분쟁해결 기준(공정거래위원회 고시)에 따라 피해를 보상받을 수 있습니다.
- A/S는 판매자에게 문의하시기 바랍니다.
제품 초기 불량시 교환 안내
①. HP 서비스센터 접수 (1588-3003 으로 제품 불량증상에 대한 상담 및 접수를 합니다.)
②. 불량 제품 발송 (용산 HP서비스센터 지점 내방 또는 택배로 발송을 해주시면 됩니다.)
③. 서비스센터 검수 (서비스 센터로 회수와 동시에 검수가 진행되며 당일 불량 판정여부가 확인됩니다.)
④. 새 상품 재발송 (초기 불량이 확인이 되면 서비스센터에서 새 상품으로 발송해 드립니다.)
- 배송비 : 기본배송료는 3,300원 입니다. (도서,산간,오지 일부지역은 배송비가 추가될 수 있습니다) 300,000원 이상 구매시 무료배송입니다.
- 본 상품의 평균 배송일은 2~3일입니다.(입금 확인 후) 설치 상품의 경우 다소 늦어질수 있습니다.[배송예정일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과는 차이가 발생할 수 있습니다.]
- 본 상품의 배송 가능일은 2~3일 입니다. 배송 가능일이란 본 상품을 주문 하신 고객님들께 상품 배송이 가능한 기간을 의미합니다. (단, 연휴 및 공휴일은 기간 계산시 제외하며 현금 주문일 경우 입금일 기준 입니다.)
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?